Memorex MVDR2100 - Manual (Page 16)

15
CONNECTION-IN (CONTINUED)
CONNECTING AN EXTERNAL UNIT (SUCH AS A DIGITAL CAMCORDER) TO THE DV IN JACK
CONNECTING AN EXTERNAL UNIT USING THE FRONT S-VIDEO OR A/V IN JACK(S)
DV OUT DV IN
DV Cable (Not Included)
PLAYBACK CAMCORDER OR
OTHER EXTERNAL UNIT
EXTERNAL UNIT
Audio Cable (Included)
Video Cable (Included)
S-Video Cable
(Not Included)
OR
NOTES FOR CONNECTING AN EXTERNAL UNIT
•
If your External unit has a S-video output, connect the DVD Recorder with the S-Video input jack for best
quality, otherwise, use the A/V jacks.
• The DV IN connection will provide the best quality, followed by the S-Video and then the A/V jacks.
• When connecting the DVD, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting the DVD, make sure the power is off and both units are unplugged before making any
connections.
• After connecting, plug the AC cord into an AC outlet, then press the Standby button to turn the unit on. Press
the SOURCE button repeatedly to select the DV IN jack, "DV" will appear on the TV.
• After connecting, plug the AC cord into an AC outlet, then press the Standby button to turn the unit on. Press
the SOURCE button repeatedly to select the front S-Video in jack, "F-SV" will appear on the TV.
• After connecting, plug the AC cord into an AC outlet, then press the Standby button to turn the unit on. Press the
SOURCE button repeatedly to select the front Audio/Video IN jack, "F-AV" will appear on the TV.
• If the external unit only has one audio output, the use of a “Y” connector may be necessary. Visit your local
electronics supply store.