Mercedes-Benz 2011 SLS AMG - Manual (Page 274)

Control system
Introduction
The control system is activated as soon as the
starter switch is in position
2.
The control system enables you to call up
information about your vehicle and to change
vehicle settings.
For example, you can use the control system
to find out when your vehicle is next due for
maintenance service, to call up statistical
data on your vehicle, and much more.
G Warning!
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions permit
it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
The control system relays information to the
multifunction display.
Multifunction steering wheel
The displays in the multifunction display and
the settings in the control system are
controlled by using the buttons on the
multifunction steering wheel.
: Multifunction display
; Press button
~
to end a call
to reject an incoming call
6 to answer a call
to dial
9
to redial 9
8 to mute
Press button
W
X
to set the volume
to operate the RACETIMER
= Press button
?
to activate the Voice Control
System
? Press button briefly
%
to cancel the Voice Control
System
to go back
to confirm messages
Press and hold button
%
to select the standard display
A Press button
;
=
to call up line for menus and to
select menus
9 Function only available in telephone menu.
272
Control system
Controls in detail
BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe
Version: 3.0.3.5
2010-03-24T15:31:10+01:00 - Seite 272