beautypg.com

Smartkey, Controls in detail, Starter switch positions – Mercedes-Benz 2011 SLS AMG User Manual

Page 244

background image

corresponds to the various starter switch
positions (

Y

page 242).

Pressing the KEYLESS-GO start/stop button
with the brake pedal firmly depressed will
start the engine (

Y

page 258).

The function of the SmartKey overrules the
KEYLESS-GO function.

KEYLESS-GO start/stop button
:

USA only

;

Canada only

Position 0

Before you press the KEYLESS-GO start/stop
button, the vehicle’s on-board electronics
have status

0 (as with SmartKey removed).

Position 1

X

Press the KEYLESS-GO start/stop button
once.
This supplies power for some electrical
consumers, e.g. wipers.

i

When you now press the KEYLESS-GO

start/stop button

R

once more, the ignition (position

2) is

switched on

R

twice more the power supply is again
switched off

Ignition (or position 2)

X

Press the KEYLESS-GO start/stop button
twice.
This supplies power for all electrical
consumers.

When you switch on the ignition, all lamps
in the instrument cluster come on. The low-
beam headlamp indicator lamp, high-beam
headlamp indicator lamp, and the turn
signal indicator lamps will only come on if
activated. If a lamp in the instrument
cluster fails to come on when the ignition
is switched on, have it checked and
replaced if necessary. If a lamp in the
instrument cluster remains on after
starting the engine or comes on while
driving, refer to “Lamps in instrument
cluster” (

Y

page 388).

i

When you now press the KEYLESS-GO

start/stop button once and the driver’s
door is open, the power supply is switched
off.

i

When you now press the KEYLESS-GO

start/stop button once, the power supply
is again switched off.

SmartKey

G

Observe Safety notes, see page 57.

The starter switch is located in the rear
storage compartment of the center console.

g

For removing SmartKey

1

Power supply for some electrical
consumers, e.g. wipers

2

Ignition (power supply for all electrical
consumers) and driving position

3

Starting position

When you switch on the ignition, all lamps in
the instrument cluster come on. The low-

242

Starter switch positions

Controls in detail

BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe

Version: 3.0.3.5

2010-03-24T15:31:10+01:00 - Seite 242

This manual is related to the following products: