Memorex MVR2040-A - Manual (Page 39)

39
ENGLISH
POWER
EJECT
TV/VCR
COUNTER RESET
INPUT SELECT
REC/OTR
SLOW
SPEED
MENU
–
+
–
+
SET
SKIP SEARCH
CLOCK/ COUNTER
–
+
TRACKING
AUT
O
CANCEL
ENTER
ST
OP
PLA
Y
F.FWD
REW
TIMER REC
PAUSE/STILL
CHANNEL
CALL
1
2
3
4
5
6
7
8
0
9
6
4 Set the start time, end time, channel and tape
speed as in step 3.
5
TO CORRECT THE SETTINGS
4
6
5
– + SET ENTER
To cancel timer recoreding, press the button again and
the Timer Record indicator will go out.
Press the TIMER REC button. The power will go
off, the Timer Record indicator will light and the
VCR stands by for recording. While setting, press the ENTER button to flash the item
to correct, then re-enter the setting with the SET
+ or –
button.
When finished, press the ENTER button.
NOTES: The VCR cannot be used while the Timer Record indicator is lit.
After a power failure or disconnection of the power plug, all programmed recording settings must be reset
upon resumption of power. In this case, reset the clock (see page 25) and reprogram any timer recordings.
Press the CANCEL button to move cursor backward for correction.
To record from external source set the channel to "L1" or "L2". "L1" and "L2" will appear next to
CH 125 (or 69). •
•
•
•
TIMER REC
〈 +/–/ENTER/CANCEL/MENU 〉
TIMER REC SET
DATE
START
END
CH
SPEED 26
11 (WED)
: 00 PM
11 : 30 PM
25
SLP
〈 +/–/ENTER/CANCEL/MENU 〉
26 (WE) 11:00PM 11:30PM 25 SLP
DATE START END CH
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
Press the ENTER button to accept them.
To enter other programmes, repeat step 2
through 4. Or, press the MENU button twice to
return to the normal screen.
ENTER MENU
5
4C80401A-E(P34-39) 25/2/99, 21:43 39