Memorex MVR2040-A - Manual (Page 25)

25
ENGLISH
POWER
EJECT
TV/VCR
COUNTER RESET
INPUT SELECT
REC/OTR
SLOW
SPEED
MENU
–
+
–
+
SET
SKIP SEARCH
CLOCK/ COUNTER
–
+
TRACKING
AUT
O
CANCEL
ENTER
ST OP
PLA
Y
F.FWD
REW
TIMER REC
PAUSE/STILL
CHANNEL
CALL
1
2
3
4
5
6
7
8
0
9
NOTES:
1
EXAMPLE: Setting the clock to "8:30 AM" October, 23 (SAT), 1999.
3
2
SETTING THE CLOCK
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the
video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button
to select the VCR mode.
When a TV is connected with an
audio/video cable, turn the TV and
this VCR on, and select the video
input mode on the TV.
Press the SET + or – button
to select the CLOCK SET
option, then press the
ENTER button.
1
4 Set the day, year and time as in Step 3.
• The day of the week will automatically appear
when you set the year.
• Press and hold down the button to increase/
decrease the minute by 10.
• Auto date and time start functioning when you
finish setting.
– + SET ENTER
〈 +/–/ENTER/MENU 〉
SYSTEM SET UP
CLOCK SET
LANGUAGE/LENGUA/LANGUE
Press the SET + or – button to set the month,
then press the ENTER button.
〈 +/–/ENTER/CANCEL/MENU 〉
MONTH
DAY
TIME
YEAR
10
23
8
(SAT)
: 30 AM
1999
〈 +/–/ENTER/CANCEL/MENU 〉
MONTH
DAY
TIME
YEAR
10
1
12
(SUN)
: 00 AM
2000
– + SET ENTER
– + SET ENTER
•
•
•
After a power failure or disconnection of the power, the timer will be lost. In this case, reset the present time.
Press the CANCEL button to move cursor backward for correction.
If you want to corret time or date while the clock is functioning, press the MENU button, then press SET +
or – button to select the SYSTEM SET UP option, then press the ENTER button.
To make any adjustments perform steps 2 through 4.
MENU
Press the MENU button.
4 2 3
4C80401A-E(P20-29) 25/2/99, 21:26 25