MITSUBISHI ELECTRIC WD-57833 - Manual (Page 59)

6. NetCommand 59
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Guide Displaying the Disc Menu (DVD or high-defini-
tion disc format)
“Learn” the DISC MENU, TOP MENU, or other key as
named on the original remote in the Guide
learning position.
While watching the device, press GUIDE to display the
disc menu.
Displaying the On-Screen Program Guide
(cable box or satellite receiver)
1. “Learn” the GUIDE key on the original remote in
the Guide learning position.
2. Learn the PAGE and PAGE keys of the
original remote in the Page Up and Page Dn
learning positions.
1. While watching the device, press GUIDE to
display the guide.
2. Press CH/PAGE / to send the Page Up/Dn
commands for the guide.
Page Up
Page Dn Using Page Up/Down
If the device’s original remote control has separate
keys for
Channel Up/Dn and Page Up/Dn, the TV
remote control’s CH/PAGE / key can work like
the two separate keys.
1. “Learn”
CHANNEL / in the Channel Up/Dn
positions.
2. “Learn” PAGE / in the Page Up/Dn posi-
tions.
Inside the Guide
Press
CH/PAGE / to send the Page Up/Dn com-
mands.
Outside the Guide
Press
CH/PAGE / to send the Channel Up/Dn
signal.
Enter Enter Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand uses
the same
ENTER key for both operations.
When ENTER has a menu or guide function or when
the original remote control uses the same key for
menus and channel selection:
Learn the
ENTER, SELECT, or OK key in the
NetCommand Enter learning position.
1. Press MENU or GUIDE to display the device’s menu
or guide.
2. Press ENTER within the menu and NetCommand
will send the Enter signal for menus.
Enter (digits) When ENTER is for channel changes, i.e., the original
remote control has a separate ENTER key for this
function):
Learn the ENTER key for channel selection in the
NetCommand Enter (digits) learning position.
Use this learning position only if the original
remote control has separate keys for
Enter in
menus and Enter for channel selection.
Press digit key(s) and then press ENTER.
NetCommand will send the Enter signal for channel
selection.
Cancel CANCEL as the Cancel or Exit Function
“Learn” the
Cancel or Exit function in the
NetCommand Cancel learning position
1. Press MENU or GUIDE to display the menu or guide.
2. Press
—
CANCEL and NetCommand will send the
Cancel or Exit signal.
—
(separator) The symbol “—” can serve as the separator
between a digital channel’s main and sub-
channel digits, e.g., digital channel 12-1 (main
channel is 12, sub-channel is 1).
“Learn” the channel separator function in the
NetCommand
– (separator) learning position.
Press digit key(s) and press
—
CANCEL . NetCommand
will send the channel-separator signal.
Operating NetCommand-Controlled Devices, continued