MITSUBISHI ELECTRIC WD-57833 - Manual (Page 47)

5. TV Menu Settings 47
Setup Menu, continued
Timer
Use the Timer to set a time for the TV to turn on auto-
matically. Use this menu to set a day, time, input, and
channel for the Timer. If the TV is already on at the
requested time, the TV will automatically tune to the
designated channel.
• The TV clock must be set before you can use the
Timer feature.
• When the Timer turns on the TV, press any key on
the remote control to keep it on. Otherwise, the TV
will turn off after five minutes.
• The TIMER indicator slowly flashes green when the TV
is off to indicate the TV Timer has been set.
Setup menu, Timer options
Setup Menu Options
Timer
Timer On, Off
Day Daily, Mon-Fri, (every) Sunday, (every) Monday, (every) Tuesday, etc.
Select the day or days of the week for the Timer to turn on the TV.
Time To set the time for the TV to come on:
1. With the hour highlighted, press repeatedly to change the hour and the
AM/
PM indicator. Press and hold to change the hour display quickly.
2. Press ENTER to highlight the minutes.
3. Press to change the minutes. Press and hold to change the minutes display quickly.
Input Ant-1, Ant-2, DVD, VCR, etc.
Select the input you want displayed when the TV comes on. Choose from the defined
and enabled inputs that appear in the
Input Selection menu.
Channel If the input is an antenna ( ANT 1, ANT 2), press repeatedly or press and hold to
scroll quickly through the available channel numbers.