MITSUBISHI ELECTRIC LT-55154 - Manual (Page 64)

64 5. NetCommand IR Control (265 Series)
For assistance call 1(800) 332-2119
Special Operation Methods
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Power On Manual Power On/Off
Use for devices that have only one
POWER key.
Press 1. INPUT.
Highlight the icon for the device to be 2.
powered on or off.
With the
3. Input Selection menu still dis-
played, press POWER to send the power
signal; you may need to press POWER twice.
Note: If you press POWER without the Input Se-
lection menu displayed, the TV will turn
off.
Press 4. ENTER to switch the TV to the device.
Power On
Power Off
Automatic Power On/Off
This feature is only for devices that have separate
POWER ON and POWER OFF keys on their original
remote controls. If your device does not have a
separate
POWER OFF key, do not use the Power
Off learning position; use only the Manual Power
ON/OFF method described above.
In the NetCommand
Learn screen:
a. “Learn” the Power On command in the
Power On learning position.
b. “Learn” the Power Off command in the
Power Off learning position.
To Power On the Device •
Press 1. INPUT.
Highlight the icon for the device to be 2.
powered on or off.
Press
3. ENTER to switch the TV to the
device and NetCommand will send the
Power On command to the device.
To Power Off the Device •
When you turn the TV off, the TV sends all
learned
Power Off commands to all devices.
Menu Displaying a Menu for the Current Device
“Learn” the MENU key on the original remote in the
Menu learning position.
Press TOOLS and number 3 to send the menu
signal to the device.
Guide Displaying the On-Screen Program Guide
(cable box or satellite receiver)
“Learn” the 1. GUIDE key on the original remote in
the Guide learning position.
Learn the 2. PAGE UP and PAGE DOWN keys of the
original remote in the Page Up and Page
Down learning positions.
While watching the device, press 1. GUIDE to
display the guide.
Press
2. PAGE to send the Page Up/Dn com-
mands for the guide.
Enter ENTER-Key Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand
uses the same
ENTER key for both operations.
When ENTER has a menu or guide function or
when the original remote control uses the same
key for menus and channel selection:
Learn the
ENTER, SELECT, or OK key in the
NetCommand Enter learning position.
Press 1. MENU or GUIDE to display the device’s
menu or guide.
Press
2. ENTER within the menu and
NetCommand will send the Enter signal for
menus.
Operating NetCommand-Controlled Devices, continued