MITSUBISHI ELECTRIC LT-55154 - Manual (Page 30)

30 3. TV Features
For assistance call 1(800) 332-2119
Using ChannelView Listings
Task Action
Display/hide
ChannelView listings
(
ANT input only).
Press GUIDE.
Move through channels
one by one. Press or .
Move through channels
quickly. Press CH.
Jump to listings for a
specific channel. Enter the channel number.
Press
CANCEL to add a dash;
press twice to clear the
channel number.
Tune to a highlighted
channel. Press ENTER.
Update program infor-
mation for a highlighted
digital channel. Press the INFO key (the
screen may briefly go
blank).
Display program descrip-
tions, if available. The
description will appear at
the bottom of the screen. Press 1. to move into
the program area.
Press
2. to move
between programs.
Display more program
description for the current
channel (if available). Press INFO.
ChannelView Channel Listings
ChannelView Custom Channel Banks
Select a channel bank to customize.
Press 1. GUIDE to display ChannelView.
Press
2. MENU to move the highlight to the bank
header.
Press
3.
to select Bank 1, 2, or 3.
With the bank name highlighted, press 4. ENTER to
enter setup mode where you can select channels to
include in the bank.
Press
5.
EXIT when finished with setup.
Task Action
Move between banks Press .
Move into the channel list Press .
Add or delete a channel
from the bank
Highlight the channel •
and press ENTER. A
check indicates the
channel has been
added.
Press
• ENTER again to
clear the check and
remove the channel.
Remove all channels
from the selected bank Press CANCEL.
Enter or exit setup mode Press MENU.
Using Custom Channel Banks
While watching TV, press • CH. The TV will tune only
to channels stored in the current bank.
To
• change to a different channel bank:
Press 1. GUIDE.
Press 2. MENU.
Press 3. .
Press 4. EXIT.
To allow tuning to any channel in memory, select •
the All bank.
ChannelView, “All” tab. Programs are listed on the right.
ChannelView displays program descriptions sent by
broadcasters. This information may be unavailable
in some areas.
About ChannelView
ChannelView™ shows memorized channels on the ANT
input. It displays channel names and program information
for digital channels. No program information is displayed
for analog channels.
ChannelView allows you to set up three banks of custom
channels for convenient access. You can save groups of
channels by content (e.g., news, sports, children’s program-
ming) or by TV user.
Note: You must first set the TV Clock (page 52) to
receive ChannelView listings.