Milan Technology MIL-W0311 - Manual (Page 54)

Serial Port
51
Serial Port Status
This screen is reached by either of the following:
• Status Screen - Serial Port Status link
• Serial Port Screen - Status link.
An example screen is shown below.
Figure 23: Serial Port Status Screen
Overview
• Status - This section displays the current connection status for the serial port connection.
• Log - Displays log messages relating to the connection status.
• Dial/HangUp Button - This button will display Dial if there is no connection and Hang-
up if a connection exists. Use this to dial the ISP, or terminate an existing connection.
If the Serial Port is Disabled, this button will display "N/A".
• Clear Log Button - Clicking this button clears all messages in the log, making new mes-
sages easier to read.
• Refresh Button - Use this to update the data on screen.
Data - Serial Port Status Screen
Status
Port Status This shows the current port operation. Possible values are:
• Internet Access
• Dial-in
• Idle
• Disabled
"Disabled" indicates neither Internet Access nor Dial-in is Enabled.