Milan Technology MIL-W0311 - Manual (Page 4)

1
Chapter 1
Introduction
This Chapter provides an overview of the Wireless Gateway's features and
capabilities
.
Congratulations on the purchase of your new Wireless Gateway Multi-Function Wireless
Gateway. The Wireless Gateway is a multi-function device providing the following services
(the wireless functions are only available on the MIL-W1311 or an MIL-W0133 with an MIL-
W1897 wireless adapter):
• Shared Internet Access via an DSL or Cable modem on the WAN (Ethernet) port, OR via
an analog modem or ISDN TA on the Serial (RS232) port.
• Wireless LAN Access Point (base station) for equipment compliant with the IEEE802.11b
(DSSS) specifications. Available on the MIL-W1311 (MIL-W0311 with MIL-W1897)
• Network Printer - LAN and WLAN users can share the printer attached to the Wireless
Gateway.
• RAS Dial-in Access - Remote users can use the Wireless Gateway to connect to the LAN
and access LAN resources, including the Wireless Gateway's printer and Broadband Inter-
net access.
Figure 1: Wireless Gateway
Wireless Gateway Features
The Wireless Gateway incorporates many advanced features, carefully designed to provide
sophisticated functions while being easy to use.
LAN Features
• Dual LAN ports. The Wireless Gateway has two (2) 10/100BaseT Ethernet LAN ports.
Normally, the “Hub” port is used to connect the Wireless Gateway to a 10/100BaseT hub
on your LAN. But if desired, the “PC” port can be used to connect the Wireless Gateway
directly to your PC, using a standard LAN cable.
• DHCP Server Support. Dynamic Host Configuration Protocol provides a dynamic IP
address to PCs and other devices upon request. The Wireless Gateway can act as a DHCP
Server for devices on your local LAN and WLAN.
1