Motorola XPR 5550 - Manual (Page 96)

Keyp
ad
Mic
rophone
Fe
atures
English
85
6 Press the PTT button to make the call. The green LED lights
up. The first line displays the target radio’s ID.
7 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone
8 Release the PTT button to listen. When the target radio
responds, the green LED blinks. The display shows the
destination alias.
9 If the Channel Free Indication feature is enabled, you hear a
short alert tone the moment the target radio releases the
PTT button, indicating the channel is free for you to respond.
Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
10 You hear a short tone. The display shows Call Ended.
NOTE: Press e button or g to exit alias search.
Viewing an Entry in the Scan List by Alias Search
Procedure:
1 g to access the menu.
2 f or h to Scan and press g to select.
3 f or h to Scan List and press g to select.
4 Key in the first character of the required alias.
5 A blinking cursor appears.
Use the keypad to type the required alias.
Press
<
to move one space to the left.
Press
>
to move one space to the right.
Press the *DEL key to delete any unwanted characters.
6 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
entries with the same name, the radio displays the entry that is
listed first in the scan list.
Editing the Scan List by Alias Search
Adding a New Entry to the Scan List
Procedure:
1 g to access the menu.
2 f or h to Scan and press g to select.
3 f or h to Scan List and press g to select.
4 f or h to Add Member and press g to select.
5 Key in the first character of the required alias.
6 A blinking cursor appears.
Use the keypad to type the required alias.