Setting the tone alert volume offset level, Turning the talk permit tone on or off, Setting the power level – Motorola XPR 5550 User Manual
Page 80: Advanced features
Advanced Features
English
68
Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if needed.
This feature adjusts the volume of the tones/alerts, allowing it to
be higher or lower than the voice volume.
Procedure:
1
g
to access the menu.
2
f
or
h
to Utilities and press
g
to select.
3
f
or
h
to Radio Settings and press
g
to select.
4
f
or
h
to Tones/Alerts and press
g
to select.
5
f
or
h
to Vol. Offset and press
g
to select.
6
f
or
h
to the required volume value. The radio sounds a
feedback tone with each corresponding volume value.
7
Press
g
to keep the required displayed volume value.
OR
Repeat Step 6 to select another volume value.
OR
e
to exit without changing the current volume offset
settings.
Turning the Talk Permit Tone On or Off
You can enable and disable the Talk Permit Tone if needed.
Procedure:
1
g
to access the menu.
2
f
or
h
to Utilities and press
g
to select.
3
f
or
h
to Radio Settings and press
g
to select.
4
f
or
h
to Tones/Alerts and press
g
to select.
5
f
or
h
to Talk Permit and press
g
to select.
6
Press
g
to enable Talk Permit Tone. The display shows 9
beside Enabled.
OR
Press
g
to disable Talk Permit Tone. The 9 disappears
from beside Enabled.
Setting the Power Level
You can customize your radio’s power setting to high or low for
each channel.
Settings:
High
enables communication with radios located at
a considerable distance from you.
Low
enables communication
with radios in closer proximity.
Procedure:
Press the programmed Power Level button to toggle transmit
power level between high and low.