Motorola XPR 5550 - Manual (Page 41)

Advanced Features
English
29
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
OR
Procedure:
Use the menu.
1 g to access the menu.
2 f or h to Contacts and press g to select.
3 f or h to the required subscriber alias or ID and press
g to select.
4 f or h to Remote Mon. and press g to select.
5 The display shows transitional mini notice, indicating the
request is in progress. The green LED lights up.
6 Wait for acknowledgment.
7 If successful, a positive indicator tone sounds and the
display shows positive mini notice. Your radio starts playing
audio from the monitored radio for a programmed duration
and display shows Rem. Monitor.
Once the timer expires, the radio sounds an alert tone and
the LED turns off.
OR
If unsuccessful, the radio sounds a negative indicator tone
the display shows negative mini notice.
You can also manually select a target radio address (see
Initiating Remote Monitor by Manual Dial on page 82).
Stopping Remote Monitor
Remote Monitor automatically stops after a programmed
duration or when there is any user operation on the target radio.
Procedure:
1 Press the programmed Transmit Interrupt Remote Dekey
button.
2 The display shows transitional mini notice, indicating the
request is in progress. The green LED lights up.
3 Wait for acknowledgment.
4 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.