Philips Magnavox MDV 530 VR - Manual (Page 39)

DVD to Videotape Duplication 39
Follow the steps below to copy a DVD to a videotape. This will
be possible only if the DVD is not copy protected.
Before you begin:
● Put a videotape in the cassette compartment. Make sure the
tape’s record tab is intact and the tape is long enough to record
the DVD.
● Put the DVD you want to copy in the disc tray.
● Press VCR so the green VCR light appears on the front of the
DVD/VCR.
● Turn on the TV.
1 Point the remote control at the DVD/VCR. Press Number
buttons 0, 0, 3. “DISC” will appear on the TV screen.
2 Press SPEED until the desired tape speed (SP or
SLP) appears briefly on the screen. Details about tape
speed are on page 72.
3 Press REC I to start recording. The red REC light will
appear on the front of the DVD/VCR.
4 Press DVD. Press PLAY B to play the disc.
5 To pause the recording, press VCR, then press PAUSE
k
once. The red REC light will flash. To resume record-
ing, press REC I or press PAUSE k again. The red
REC light will come on again.
6 To stop recording, press VCR, then press STOP C.
3,5
6
1
DISC
STANDBY-ON
TIMER SET
SLOW
VCR/TV
ZOOM
DISPLAY
3
4 5 6
7 8 9
SPEED
0 +10
2 1
VCR DVD
CLEAR
REPEAT
SETUP
TITLE RETURN MODE
C-RESET
A-B
AUDIO ANGLE SUBTITLE
REC REPEAT
DISC
MENU OK
PAUSE
REW FF
PLAY STOP
SKIP/
CH
SKIP/
CH
SEARCH MODE
5
2
4
5,6
• A timer recording is not possible
during DVD to videotape duplica-
tion.
Helpful Hint