Disc playback 19 – Philips Magnavox MDV 530 VR User Manual

Page 19

Disc Playback

• An “X” may appear at the top right

corner of the TV screen when you
try a feature. Either the feature is
not available on the Disc, or the
DVD/VCR cannot access the feature
at this time. This does not indicate a
problem with the DVD/VCR.

• If a Disc is dirty or scratched, the

picture may appear distorted or
playback may stop. Remove the
Disc and turn off the DVD/VCR.
Disconnect the power cord, then
reconnect it. Clean the Disc, then
turn on the DVD/VCR again and
reinsert the Disc for playback.

• When the DVD or CD light appears

on the display panel, the Disc is
loaded and ready for playback.

• When you press OPEN/CLOSE

or PLAY (DVD) on the front of the
DVD/VCR when the power is off,
the DVD/VCR will turn on in DVD
mode. Otherwise, the DVD/VCR will
turn on in the mode in which it was
turned off.

Helpful Hints

Before you begin, turn on the TV, Stereo, and other equipment
connected to the DVD/VCR. Make sure the TV and the Stereo (if
applicable) are set to the correct channel.
Details are on pages 7-

15.

Press STANDBY-ON to turn on the DVD/VCR.

Press DVD so the red DVD light appears on the
front of the DVD/VCR.

Press OPEN/CLOSE

(to the right of the disc tray on

the front of the DVD/VCR) to open the Disc tray.

Place a Disc into the tray. If the DVD is recorded on
only one side, place the Disc in the tray with the label fac-
ing up and the shiny side facing down. Some DVDs are
recorded on both sides. Make sure the label of the side
you want to play is facing up.

Press PLAY B. The tray will close and play will begin at
the first Chapter or Track. If a DVD menu appears instead,
see page 48. With some Audio CDs, playback will not
begin unless you press PLAY B.
Or, press OPEN/CLOSE

or press the tray toward the

DVD/VCR to close the tray.
With MP3 and JPEG files, playback will begin from Track

Press STOP C to stop playback.

Insert a Disc.

Remember, this DVD/VCR

will play only certain Discs.

See page six for details.

Press OPEN/CLOSE A
on the DVD/VCR.

STANDBY-ON

TIMER SET

DISPLAY

VCR

DVD

CLEAR

REPEAT

SETUP

TITLE

RETURN

MODE

C-RESET

A-B

AUDIO

ANGLE

SUBTITLE

REC

REPEAT

DISC

PAUSE

REW

PLAY

STOP

SKIP/