38 timer recording (cont’d) – Philips Magnavox MDV 530 VR User Manual

Page 38

Cancelling Timer Recordings

Press VCR, then press DISC/MENU.

Press o or p to select TIMER PROGRAMMING,
then press B.

Press o or p to find the program you want to
cancel.

While the program number is flashing, press s to
clear all the information for that program.

Press C-RESET/CLEAR to remove the menu.

ONE TIME PROGRAM

PROGRAM NUMBER

DATE

05/04

SUN

START TIME

07:30

END

TIME

08:30

CHANNEL

REC SPEED

38 Timer Recording (cont’d)

Press o or p to select a recording tape speed. The
arrow will appear beside your choice. The selected speed
will flash beside REC SPEED. Details about tape speed are on
page 72.

Press C-RESET/CLEAR to store the timer recording.

Press TIMER SET. The DVD/VCR will turn off and the
red TIMER REC light will appear on the front of the
DVD/VCR. In some cases, the DVD/VCR will switch to
DVD mode instead. You may use the DVD Player during
a timer recording.
If you want to use the VCR until time for the recording,
don’t press TIMER SET until a few minutes before the
recording should start. Or, press TIMER SET only when
you know you won’t be using the VCR anymore (until
after the recording). When the TIMER REC light is on,
you cannot put the DVD/VCR in VCR mode by pressing
VCR or OUTPUT. You must first press TIMER SET to
cancel the timer recording temporarily. Then, you can
use the VCR features again.

ONE TIME PROGRAM

PROGRAM NUMBER

DATE

0 5 / 0 4 SUN

START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL

1 6

REC SPEED

S P

SLP

• If you are recording from other

equipment, set CHANNEL to L

or L2. If you connected the other
equipment to the AUDIO and
VIDEO In jacks on the front of the
DVD/VCR, choose L2. If you con-
nected the audio and video cables
to the AUDIO IN and VIDEO IN
jacks on the back of the
DVD/VCR, choose L

• To change incorrect information,

press

to choose the item

you want to change. Press o or
p

to adjust the information.

• If a timer recording is set and the

TIMER REC light is on, pressing
STOP/EJECT

C A

will turn on the

DVD/VCR and/or cancel the timer
recording. The TIMER REC light
will turn off. Press STOP/EJECT

C A

again to remove the tape.

Remember to insert a tape and
press TIMER SET to reset the
timer recording.

• If there is no tape in the VCR

when you press TIMER SET, the
TIMER REC light will flash. Insert
a tape.

Helpful Hints

STANDBY-ON

TIMER SET

SLOW

DISPLAY

SPEED

VCR

DVD

CLEAR

REPEAT

SETUP

TITLE

RETURN

MODE

C-RESET

A-B

AUDIO

ANGLE

SUBTITLE

REC

REPEAT

DISC

PAUSE

REW

PLAY

STOP

SKIP/