Philips Magnavox MDV 530 VR - Manual (Page 18)

18 Video Cassette Playback
• Other tape playback features are
on pages 40-47.
• If AUTO REPEAT is ON, playback
will begin when you insert a tape,
even when the record tab is intact.
Details are on page 40.
• You must connect the DVD/VCR to
a TV using the RF coaxial cable or
the audio/video cables in order to
use the VCR features. These
hookups are explained on pages
eight and
11.
Helpful Hints
Read and follow the steps below to play a tape.
1 Turn on the TV. Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel. This depends on how you
connected the DVD/VCR to a TV.
Details are on pages 7-
15.
2 With the DVD/VCR power off, insert a tape in the
cassette compartment of the DVD/VCR. The
STANDBY-ON and VCR lights will appear on the front of
the DVD/VCR. If the tape’s record tab has been removed,
playback will start automatically.
If the DVD/VCR power is already on, press VCR to put
the DVD/VCR in VCR mode if necessary. The green VCR
light will appear on the front of the DVD/VCR.
3 If playback does not start automatically, press VCR,
then press PLAY B.
4 Press STOP C to stop playback.
5 Press REW h to rewind the tape.
6 After the tape stops, press STOP/EJECT C A on the
front of the DVD/VCR to remove the tape.
1
2
6 Press STOP/EJECT C A on
the DVD/VCR.
Turn on the TV.
Insert a tape in the
DVD/VCR.
STANDBY-ON
TIMER SET
SLOW
DISPLAY
3
4 5 6
SPEED
2 1
VCR DVD
CLEAR
REPEAT
SETUP
TITLE RETURN MODE
C-RESET
A-B
AUDIO ANGLE SUBTITLE
REC REPEAT
DISC
MENU OK
PAUSE
REW FF
PLAY STOP
SKIP/
CH
SKIP/
CH
3
4
5