Mio A701 - Manual (Page 11)

11
Note: In order to receive voice instructions, sound should not be muted (Page 73),
voice guidance must be enabled (Page 74), and a route must be active.
Note: If you have disabled Smart Zoom by tilting, rotating or moving the map during
navigation (i.e. the Lock button appears on the screen), this button will first re-enable
normal navigation, and will say the instruction only after being pushed again.
Note: When applied on list and menu screens, this button will select the highlighted
item.
3.1.4 The Route Information screen
To give easy access to the most important data screen during navigation, a
hardware button is reserved for opening the Route Information screen. Alternatively,
tap the travel data fields of the Cockpit screen (Page 21) or the Info button (Page 50)
in the Route menu to display this screen.
3.1.5 Toggling between the Map and Cockpit screens
You may want to temporarily switch between the Cockpit screen and the Map screen
during navigation. For example you may want to use the Map screen to have a better
view of the map, or to save a POI. The Cockpit screen can come in handy if you wish
to quickly check the name of the street you are on. This button will let you toggle
between the two screens. Alternatively, you can return to the Main menu, and select
the other screen from there.
3.2 Screen buttons and controls
The primary input channel of MioMap is the touch screen. If you read on, you will
realise that most parts of the screen are not only used to display information but also
to initiate functions by tapping. Below you will find a list of the most frequently used
controls in the program.
3.2.1 Direct selectors
Some of the settings can be chosen from a short list of possible values. If the values
can be described graphically, all values are available on the screen.
Tap one of the icons to set/change the value.