Mastic Spark Modern Fires 91P - Manual (Page 5)

4 L100001 5
PRODUCT FEATURES
AND
CODE APPROVAL
Figure 1 - Fireplace controls
• This appliance has been certified
for use with either natural or
propane gas. See appropriate data
plates.
• This appliance is not for use with
solid fuels.
• The appliance is approved for bed-
room or bedsitting room (studio
appartment) installations.
• The appliance must be installed in
accordance with local codes if any.
If none exist use the current instal-
lation code. ANSI Z223.1/NFPA
54 in the USA, CAN/CGA B149
in Canada.
• This appliance is mobile home
approved.
• The appliance must be properly
connected to a venting system.
• The appliance is not approved for
closet or recessed installations.
PRODUCT SPECIFICATIONS FIREPLACE CONTROLS
(see Figure 1)
CODE APPROVAL
Direct Vent type appliances draw all combustion air from outside of the dwelling through the vent pipe.
These appliances have been tested by
OMNI-Test Laboratories, Inc. . and found to comply with the established standards for
DIRECT VENT GAS FIREPLACE HEATERS in the USA and Canada as follows:
VENTED GAS FIREPLACE HEATERS
TESTED TO: ANSI Z21.88-2005/CSA 2.33-2005 and CSA P.4.1-02, CGA 2.17-M91 STANDARDS
1 - Hi/Lo Flame Control
1 2 3 4
2 - Off/Pilot/On Knob
3 - Remote Control Receiver (optional)
4 - Blower Speed Control