Magellan eXplorist 210 - Manual (Page 12)

eXplorist 210 GPS Receiver 9
Connecting to a Personal Computer (requires optional USB cable)
Turn your eXplorist off and connect the round connector of the
eXplorist data cable to the back of your eXplorist and tighten the
locking screw. There are alignment tabs on the connector to
make sure that the connector is installed properly. It is
recommended that you connect the eXplorist to external power
using the external AC power adapter.
The other end of the eXplorist data cable has a standard USB
connector that you connect to your personal computer USB ports
(normally found on the back of your personal computer). Turn
your personal computer on and then turn on your eXplorist. You
may see a message on your computer indicating that it has found
a new USB hardware device. On your eXplorist, a screen is
displayed indicating that it is in USB File transfer mode.
Right click the “My Computer” icon on the desktop of your
computer and select the “Explore” option. From here you are
able to copy files to and from the eXplorist to your computer.
WARNING
: When connecting the USB cable, always
connect it to the eXplorist first before plugging the AC power
adapter into a wall socket.