Mercedes-Benz 2004 ML 500 - Manual (Page 97)

97
Controls in detail
Seats
Removing and installing rear seat head
restraints
Removing rear seat head restraints
̈ Pull head restraint to its highest
position.
̈ Push button 1 and pull out head
restraint.
Installing rear seat head restraints
̈ Insert head restraint and push it down
to the stop.
̈ Push button 1 and adjust head
restraint to the desired position
(
୴ page 36).
Stowing rear center head restraint
1 Rear center head restraint
2 Bar
3 Clip
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
i
For a better view toward the rear, you
can store the rear center head restraint
underneath the rear seat (
୴ page 97).
୴୴