Mercedes-Benz 2004 ML 500 - Manual (Page 274)

274
Practical hints
Flat tire
̄ Flat tire
Mounting the spare wheel Preparing the vehicle
̈ Park the vehicle as far as possible from
moving traffic on a hard surface.
̈ Turn on the hazard warning flashers.
̈ Engage the steering wheel lock in the
straight ahead position and set the
parking brake.
̈ Move the gear selector lever to P.
̈ Have any passenger exit the vehicle at
a safe distance from the roadway.
̈ Take the spare wheel out of its carrier
(
୴ page 259).
Lifting the vehicle
̈ Prevent the vehicle from rolling away
by blocking wheels with wheel chocks
(not included) or other sizable objects.
When changing wheel on a level surface:
̈ Place one chock in front of and one be-
hind the wheel that is diagonally oppo-
site to the wheel being changed.
When changing wheel on a hill:
̈ Place chocks on the downhill side
blocking both wheels of the other axle.
̈ Take the two-piece wheel wrench and
the jack out of the rear compartment
area (
୴ page 257). Assemble wheel
wrench.
Warning!
G
The dimensions of the spare wheel are dif-
ferent from those of the road wheels. As a
result, the vehicle handling characteristics
change when driving with a mounted spare
wheel. Adapt your driving style accordingly.
The spare wheel is for temporary use only.
When driving with spare wheel mounted, en-
sure proper tire pressure and do not exceed
vehicle speed of 50 mph (80 km/h).
Drive to the nearest Mercedes-Benz Light
Truck Center as soon as possible to have the
spare wheel replaced with a regular road
wheel.
Never operate the vehicle with more than
one spare wheel mounted.