Mercedes-Benz 2004 ML 500 - Manual (Page 37)

37
Getting started
Adjusting
Head restraint tilt
Manually adjust the angle of the head
restraint.
̈ Push or pull on the upper edge of the
head restraint cushion.
More information on seats can be found in
the “Controls in detail” section
(
୴ page 95).
Power seat* adjustment
The seat adjustment switch is located on
the entry side of each front seat base.
1 Backrest tilt
2 Seat fore and aft adjustment
3 Seat cushion tilt
4 Seat height
̈ Turn the key in the steering lock to
position 1 or 2 (
୴ page 33).
or
̈ Open the driver’s or passenger door.
Seat fore and aft adjustment
̈ Press the switch forward or backward
in the direction of arrow 1.
Adjust seat to a comfortable seating
position that still allows you to reach
the accelerator/brake pedal safely.
The position should be as far to the rear
as possible, consistent with ability to
properly operate controls.
i
When moving the seat, be sure that
there are no items in the footwell or be-
hind the seat. Otherwise you could
damage the seat.
The memory function* ( ୴ page 105)
lets you store the setting for the seat
positions together with the setting for
the exterior rear view mirrors.