Mercedes-Benz 2004 ML 500 - Manual (Page 269)

269
Practical hints
Replacing bulbs
High beam bulbs
1 High beam headlamp cover with lock-
ing tab
̈ Switch off the lights.
̈ Open the hood ( ୴ page 217).
̈ Twist cover 1 counterclockwise and
remove.
2 Electrical connector
̈ Pull electrical connector 2 off.
̈ Unclip the retainer springs and take out
the bulb.
̈ Insert the new bulb so that the base lo-
cates in the recess on the holder.
̈ Clip the retainer springs.
̈ Plug the connector 2 onto the bulb.
̈ Align headlamp cover and click into
place.
Turn signal, parking, standing and side
marker lamp bulbs
1 Bulb socket
̈ Switch off the lights.
̈ Open the hood ( ୴ page 217).
̈ Twist bulb socket 1 counterclockwise
and pull out.
̈ Push bulb into socket, turn counter-
clockwise and remove.
̈ Insert new bulb in socket, push in and
twist clockwise.
̈ Reinstall the bulb socket. ୴୴