Mercedes-Benz 2004 ML 500 - Manual (Page 300)

300
Technical data
Fuels, coolants, lubricants etc.
̄ Fuels, coolants, lubricants etc.
Capacities
Vehicle components and their respective
lubricants must match.
Therefore use only brands tested and
approved by Mercedes-Benz. Please refer to the Factory Approved
Service Products pamphlet, or inquire at
your Mercedes-Benz Light Truck Center.
Model Capacity Fuels, coolants, lubricants etc.
Engine with oil filter ML 350, ML 500 8.5 US qt (8.0 l) Approved engine oils
Automatic transmis-
sion 9.0 US qt (8.5 l) MB Automatic Transmission Oil
Transfer case 1.6 US qt (1.5 l) (Dexron 3 or Dexron 2E)
Rear axle 1.3 US qt (1.25 l) (Hypoid gear oil SAE 90, 85 W 90)
Front axle 1.2 US qt (1.1 l) (Hypoid gear oil SAE 90)
Power steering approx. 0.65 US qt (0.6 l) MB Power Steering Fluid
Front wheel hubs approx. 1.5 oz (43 g) each High temperature roller bearing grease