beautypg.com

Special playback, 73 en 73 en, Zoom – Philips Magnavox H2160MW9 A User Manual

Page 75: Marker setting

background image

73

EN

73

EN

Recording

Playback

Basic Setup

Connections

Editing

Introduction

Function Setup

Others

Español

SPECIAL PLAYBACK

Zoom

Note

• When selecting a smaller factor than the current one,

the zoom area will not be displayed.

• To exit the zoom menu, press [RETURN] repeatedly

at step 3.

• To cancel the zoom function, select “x1.0” using

[K / L], then press [OK] at step 3.

• You cannot slide the zoomed picture on some JPEG

files.

1) During playback, press [DISPLAY].

2) Use [{ / B] to select

to display the selection

menu.

e.g.) DVD-video

1/ 5

1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [K / L] to select a desired zoom factor to zoom,

then press [OK].

1/ 5

1/ 5

DVD

Ч 1.2
Ч 1.5
Ч 2.0

0:01:00 / 1:23:45

Video

Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.

Zoom area will be displayed.

4) Use [K / L / { / B] to select a desired zoom

position, then press [OK].

Zoom playback will start.

This feature allows you to assign a specific point on a title
to be called back later.

1) During playback, press [DISPLAY] to bring up the

display menu.
If the display menu is already shown, skip to step 2.

2) Use [{ / B] to select

to display the marker list.

e.g.) DVD-video

1/ 5

1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [K / L] to select a desired marker number.

When it reaches the desired point, press [OK].

1/ 5

1/ 5

DVD

---
---
---
---
---
---

1

2

3

4

5

6

0:01:00 / 1:23:45

Video

The title (track) number and the time will be displayed.

4) To return to the marker later:

Use [K / L] to select the desired marker number,
then press [OK].

Marker Setting

Note

• To clear a marker, select the marker number to be

cleared, then press [CLEAR].

• All markers will be erased when you operate these

operations listed below.

– opening the disc tray (DVD/CD only)
– turning the unit to the standby mode (DVD/ CD only)
– make additional recording on the disc (DVD only)
– editing any title (DVD only)
– dividing the title (HDD only)
– deleting a scene of the title (HDD only)
• You can mark up to 6 points.
• Marker setting is not available when you play back

the video CD with PBC function.

E2S00UD_H2160MW9_EN_v1.indd 73

E2S00UD_H2160MW9_EN_v1.indd 73

2008/12/02 14:22:33

2008/12/02 14:22:33