Marantz R3001 User Manual

Page 24

ENGLISH

When you select “MANUAL” in T-MODE menu

by pressing the

1 or 2 button, this unit will emit

a pink noise from the front left speaker. At this
time, adjust the desired level of the master
volume. Remember the level of this noise and
then press the

4 button. This unit will emit the

pink noise from the center speaker.

Using

the

1 and 2 cursor buttons, adjust the

volume level of the noise from the center
speaker so that it is the same level as the front
left speaker (Note that this can be adjusted
to any level between –10 and +10 dB in 1dB
intervals).

+10dB

+9dB

-9dB

Minimum

Maximum

1 dB interval

Reference

1 dB interval

-10dB

(SW -15 dB)

button

0dB

Press

the

4 cursor button again. This unit will

now emit the pink noise from the front right
speaker.

Repeat steps 2 and 3 above for the front right

and other speakers until all speakers are
adjusted to the same volume level.

Press

the

ENTER button, you can stop the test

tone mode. Or press the

1 or 2 cursor button to

select “EXIT” then press the ENTER button to
exit the SETUP MENU.

Or press the

1 or 2 button to select “RETURN”

then press the ENTER button to return the
previous “2-2. Speakers Distance” setup.

Notes:

• Speakers that you selected “None” for in the Speaker

Size Setup menu will not appear.

• The setup level for each channel is memorized for

reproduction in all surround mode by this method
exclude CS mode, Multi channel stereo mode and
7.1 ch input mode.

• To adjust the speaker levels for 7.1-channel input

sources, you will need to use the 7.1CH Level Input
setup menu.

2-3. SPEAKERS LEVEL SETTING WITH TEST TONE

Here you will set the volume for each speaker so that
they are all heard by the listener at the same level.
Moreover, if the T.TONE button is pressed, unit can
enter into this menu directly.

Note:

The speaker level settings are not available in 7.1
Channel Input mode, CS mode and Multi Channel
Stereo mode.

T(TEST) MODE :

Selects “MANUAL” or “AUTO” for generating mode
of test tone

1 or 2 cursor button.

If you select “AUTO” by pressing the

4 button, the

test tone will be cycled through in a circular pattern
which is L (Left) → C (Center) → R (Right) → SR
(Surround Right) → SBR (Surround Back Right) →
SBL (Surround Back Left) → SL (Surround Left) →
SW (Subwoofer) → L →.. increments of 2 seconds
for each channel.
Using the

1 and 2 cursor buttons, adjust the volume

level of the noise from the speaker so that it is the
same level for all speaker.
Press the ENTER button, you can stop the test tone
mode. Or press the

1 or 2 cursor button to select

“EXIT” then press the ENTER button to exit the
SETUP MENU.
Or press the

1 or 2 cursor button to select “RETURN”

then press the ENTER button to return the previous
“2-2. Speakers Distance” setup.

If you select “MANUAL”, adjust the output level of each
speaker as follow.

SURROUND

AV SURROUND RECEIVER SR3001

INPUT SELECTOR

PHONES

STANDBY

7.1CH INPUT

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

MENU

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

DISP

MULTI

AUTO

TUNED

V – OFF

NIGHT

PEAK

ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT

DISC 6.1

MT X 6.1

DIGITAL

SURROUND

AAC

PCM

LFE

POWER ON/OFF

S. SPEAKER B

NIGHT

CSII

EX/ES

VIRTUAL

DTS

PURE DIRECT

AUTO

T.TONE

MENU OFF

SET UP/

MENU

OSD

VOL.

MAIN

SLEEP

MUTE

AMP

ENTER

AUX1

MAIN

2-4. SPEAKERS LEVEL SETTING WITHOUT TEST TONE

Channel level (speaker level) can be adjusted
without using test tone.

Note:

Four channel level settings can be memorized for
reproduction: the 7.1 ch input mode, CS mode, Multi
channel stereo mode, and all other surround modes,
respectively.

Set the surround mode or 7.1 ch input mode

which you want to adjust the channel level.

Press

the

CH.SEL button on the remote.

Select the desired channel (speaker) with the

2 cursor buttons.

Adjust the level with the

3 or 4 cursor buttons.

After completing the setup, press the CH.SEL

button again.

MENU STRUCTURE of Speaker Level setup

MANU

AUTO

SBR

EXIT

RETURN

TO MAIN MENU

SBL

Speaker

(Auto)

Speakers

Distance setup

MAIN

exit SETUP

Test Tone mode

Speakers

Level setup

Speakers

Distance

setup

Direct selec

by remote

control

Listening

Positiom