Marantz R3001 User Manual

Page 22

ENGLISH

If you fi nish these setup, press the

3 or 4

cursor button to select “TO MAIN MENU” then
press the ENTER button to return the SETUP
MENU.

Or press the

1 or 2 cursor button to select

“EXIT” then press the ENTER button to exit the
SETUP MENU.

Notes:

• When a DTS-LD or DTS-CD is playing, this setup is

not available. This is to avoid noise being generated
from the analog input.

• If “Dx-AUTO” is selected and a DVD, compact disc

or LD is fast forwarded during playback, decoded
signals may produce a skipping sound. In such cases,
change the setting to DIGITAL.

• Same digital input function cannot be set. In this

case, the previous setting is set to ANALOG.
Same digital input number cannot be set in Digital
AUTO mode and Digital Fixed mode. For example,
D1AUTO and DIG.1 are not set at same time.

• The TUNER is fi xed to the analog input, and can not

be selected for any digital input.

2. SPEAKER SETUP

After you have installed the SR3001, connected all
the components, and determined the speaker layout,
it is now time to perform the settings in the Speaker
Setup menu for the optimum sound acoustics for your
environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following
characteristics:

2-1. SPEAKERS SIZE

When setting the speaker size in the SPEAKER
SIZE sub-menu, use the guidelines given below.
Large:

The complete frequency range for the channel you
are setting will be output from the speaker.

Small:

Frequencies of the channel you are setting
lower than approx. 100Hz will be output from the
subwoofer.
If the Subwoofer is set to “NONE” and the front
speakers are set to “Large,” then the sound may
be output from both the left and right speakers.

DTS

PURE DIRECT

AUTO

T.TONE

MENU OFF

SET UP/

MENU

OSD

VOL.

MAIN

SLEEP

MUTE

ENTER

SURROUND

D RECEIVER SR3001

EAKER

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

MENU

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

DISP

MULTI

AUTO

TUNED

V – OFF

NIGHT

PEAK

ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT

DISC 6.1

MT X 6.1

DIGITAL

SURROUND

AAC

PCM

LFE

Select “2.SPEAKER” in SETUP MENU with

4 cursor button,

Press

the

ENTER button to enter the menu.

The fi rst sub-menu item is “2-1.Speakers Size”
setup.

Press

3 or 4 cursor button to select the each

speaker.

Press

1 or 2 cursor button to select the setting

of size to each speaker.

If you fi nish these setup, press the

3 or 4

cursor button to select “NEXT”.

Press

the

ENTER button to enter the next “2-2.

Speakers Distance” setup.

Or press the

1 or 2 cursor button to select

“EXIT” then press the ENTER button to exit the
SETUP MENU.

Or press the

1 or 2 cursor button to select “TO

MAIN MENU” then press the ENTER button to
return the SETUP MENU.

MENU STRUCTURE of Speakers Size setup

Speakers

Size

Select when a subwoofer is connected.

Select if the front speakers are large sized.

Select if the center speaker is small sized.

Select when a subwoofer is not connected.

Select if the front speakers are small sized.

Select if the center speaker is large sized.

Select if no center speaker is connected.

Select if no surround left and right speakers are connected.

Select if the surround left and right speakers are large sized.

Select if the surround left and right speakers are small sized.

YES

NONE

LARGE

SMALL

L & R

CENTER

LARGE

NONE

SMALL

LARGE

NONE

SL & SR

Select if no surround back speaker is connected

Select if the surround back left and right speakers are connected

Select if the surround back speaker is connected

2CH

NONE

Select if the surround back speaker(s) is large sized

This menu (SB SIZE) will not be displayed, if SB is set "NONE".

Select if the surround back speaker(s) is small sized

SMALL

LARGE

***

SB SIZE

Select this when the bass speaker is about 8cm(3 3/16inches)

Select this when the bass speaker is about 10cm(3 15/16inches)

Select this when the bass speaker is about 12cm(4 3/4inches)

100

120

LPF/HPF

SUBW

2-1. SPEAKERS SIZE

setup

1CH

MAIN MENU

exit SETUP

Speakers Distance

setup

TO MAIN

EXIT

In this case, the audio signal is emitted form
the Surround back L output terminal.