Mazda 2009 6 - Manual (Page 285)

Black plate (285,1)
NOTE
l If the programming failed, “Err” flashes
for three seconds then it returns to the
normal display.
l Programming cannot be performed while
the vehicle is moving. If you attempt to
perform programming while the vehicle is
moving,
“PAIR DISABLE” is displayed and
it returns to the normal display.
l If seven Bluetooth audio devices have
already been programmed to the vehicle,
programming cannot be performed and
“MEMORY FULL” is displayed. Delete
one programmed device to program
another one.
Programming a Bluetooth audio device
which does not have a PIN code (4
digits)
1. Using the audio control dial, select the
pairing program mode
“PAIR DEVICE” in the “BT SETUP”
mode. (Refer to
“Bluetooth audio set up” for details.)
2. Press the audio control dial to
determine the mode.
After
“ENTER PIN” is displayed on
the information display for 3 seconds,
“PIN 0000” is displayed and the PIN
code can be input.
3. Press the audio control dial while
“PIN 0000” is displayed.
“PAIRING” flashes on the display.
4. Operate the Bluetooth audio device and
set it to the program mode while
“PAIRING” is flashing.
5. As the Bluetooth audio device requires
a PIN code, input
“0000”.
6. When the programming is completed,
“ ” and “PAIR SUCCESS” are
displayed after about 10-30 seconds,
after which
“PAIR SUCCESS”
continues to be displayed for three
seconds, and then the unit returns to the
normal display.
NOTE
l If the programming failed, “Err” flashes
for three seconds then returns to the normal
display.
l Programming cannot be performed while
the vehicle is moving. If you attempt to
perform programming,
“PAIR DISABLE”
is displayed and it returns to the normal
display.
l If seven Bluetooth audio devices have
already been programmed to the vehicle,
programming cannot be performed and
“MEMORY FULL” is displayed. Delete
one programmed device to program
another one.
Changing the link to a Bluetooth audio
device
If several devices have been programmed,
the Bluetooth unit links the device last
programmed. If you would like to link a
different programmed device, it is
necessary to change the link. The order of
device priority after the link has been
changed is maintained even when the
ignition is switched off (LOCK).
1. Using the audio control dial, select the
link change mode “LINK CHANGE”
in the “BT SETUP” mode. (Refer to
“Bluetooth audio device set-up” for
details.)
2. Press the audio control dial to
determine the mode.
Interior Comfort
Bluetooth Audio
6-67
Mazda6_8Z64-EA-08H_Edition1 Page285
Wednesday, June 25 2008 10:4 AM
Form No.8Z64-EA-08H