Motorola 3460 Fast'R - Manual (Page 80)

3460 Fast’R
C-16
24 DTR not in proper state 63 Sec fail - Manager Timeout
25 Number Forbidden or Delayed 64 Sec fail - Invalid callback number
26 Retrain threshold exceeded 65 Sec fail - Inter-digit timeout
27 Ans/Orig mode changed-Pin 11 66 DTE inactivity timer expired
28 No stored number to dial 67 Restoral - ACU
29 Test in progress 68 End restoral - ACU
30 Callback in progress 69 Restoral - DTR ACU
31 FSK & sync mode invalid 70 End restoral - DTR
32 Semicolon detected 74 Remote disconnect w/o sending
PSTN
33 ABT timeout, no ringback 75 Configuration change caused
disconnect
34 ABT timeout, with ringback 76 Retrain time exceeded
35 ABT timeout, no call progress 77
Table 2-5. +FHS Command Responses: Hang-Up Status
Codes
Value Description
Call placement and termination hang-up codes:
00 Normal end of connection
01 Ring Detect without successful handshake
02 Call aborted, from +FKS or
03 No Loop Current
04 Ringback detected, no answer (time-out)
05 Ringback detected, answer without CED
Transmit Phase A and miscellaneous errors:
10 Unspecified Phase A error
11 No answer (T.30 T1 time-out
Transmit Phase B hang-up codes:
20 Unspecified Transmit Phase B error
21 Remote cannot receive or send
22 “Command Received?” error in transmit Phase B
23 “Command Received?” invalid command received
24 “Response Received?” error
Table 2-4. Disconnect Reasons (continued)
Code Description Code Description