Motorola 3460 Fast'R - Manual (Page 73)

3460 Fast’R
C-9
4 9600 BPS
5 12.0 KBPS
6 14.4 KBPS
7 16.8 KBPS
8 19.2 KBPS
9 21.6 KBPS
10 24.0 KBPS
11 26.4 KBPS
12 28.8 KBPS
13 31.2 KBPS
14 31.2 KBPS
16 38.4 KBPS
24 57.6 KBPS
48 115.2 KBPS
96 230.4 KBPS
+FBO= Controls mapping between PSTN facsimile data and the
DTE-DCE link, for Phase C and Phase B/D data.
0 Direct bit order for all data
1 Reversed bit order for Phase C data; direct bit order for
Phase B/D data
+FCR=n Specifies whether the modem can receive message data.
0 The modem cannot receive message data and cannot poll
a remote device. The modem can send data and it can be
polled for a document
1 The modem can receive message data.
+FBU Controls HDLC frame reporting
0 Disable
1 Enable
Table 2-2. Fax Class 2.0 AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.