Motorola 3460 Fast'R - Manual (Page 37)

3460 Fast’R
A-19
Control Buttons
The control buttons let you access parameters and options.
Compatibility
The modem is compatible with modems that comply with the CCITT
V-series specifications and ITU modulation modes, including the
Motorola 326X Series, V.3400 Series, and “M” Series modems.
326X Leased-Line Operation Note
For optimum performance between a 3460 and a 326X in V.34 mode
over a leased line, Motorola recommends the following configuration:
• Set the 3460 to V.34 Only modulation mode (AT*MM parameter)
• Set the 326X modulation mode to:
— V.34 Auto if it is set to Originate
— V.34 Only if it is set to Answer
• Set the maximum modem (DCE) rate (AT*MX parameter) to 31.2
on at least one modem.
Front-Panel Control Buttons
Button Function
Return
Steps up through the menu tree from a parameter to a category, or
from a category to the default display.
Example: from Test=, pressing displays the TEST OPTS
category.
Across
Steps through the parameters in a menu category.
Example: From Test=, pressing displays the Accept RDL
option.
Down
At the menu tree top level, steps through categories
At a parameter within a category, steps through the options.
Example: From Test=End Test, pressing displays Test=:LAL.
Enter
In the menu tree, selects an option and/or initiates an action.
Allows you to toggle between using a telephone and the modem
to establish a telephone connection.