Micro Innovations M000174-19 - Manual (Page 63)

Windows CE Programs
M000174-19 63
7.8 F ILE SERVER
With Windows CE 5.0 a file server is contained in the device.
Note:
Further information on the functionality of the file server is provided in the Microsoft MSDN
documentation.
7.8.1 G ENERAL S ETTINGS
The following registry settings control the functionality of the file server (see also chapter Registry
Editor).
Note:
Changes to the registry entries are not active until the next restart of the file server (see
File server
start/stop ) of the file server.
The dword entries are in hexadecimal format (see also chapter Sample settings ).
Registry entries under [HKEY_LOCAL_MACHINE\Services\Smbserver\Shares]:
Entry Type Description
UseAuthentication dword Set to 1 by default.
If this value is set to 0 (not recommended), the authentication on the file
server is deactivated and all users on the network have access to all
enables.
Observe the instructions of chapter Use without authentication .
7.8.2 VIRTUAL DIRECTORY SETTINGS
These registry entries contain the mapping between the virtual directories in the file server and the
physical directories on the device.
Note:
Changes to the registry entries are not active until the next restart (see
File server start/stop ) of the file
server.
The dword entries are in hexadecimal format (see also chapter Sample settings ).
Registry entries under [HKEY_LOCAL_MACHINE\Services\SMBServer\Shares\«Enablename»]:
Entry Type Description
Path string Specified directory which is enabled.
Type dword 0 for file enable
1 for print enable (not supported)
UserList string Specifies a comma-separated list of authorized users.
These must be created via the User Administration (UserAdmin) .
This entry is ignored if UseAuthentication = 0 is set.