Micro Innovations M000174-19 - Manual (Page 46)

Programs Windows CE
46 M000174-19
7.2 F ORMAT
Note:
The «Format» program is only available on XV400 devices.
The «Format» program for formatting Flash cards (PCMCIA or Compact Flash) can be started via the
menu shown below.
The program is started as follows:
The Flash card drive can be selected in the top left selection field. The lower display field shows the
information about the selected drive. This information includes details such as FAT type, total
memory, currently used memory etc. Much of the information is not normally required.
The «Format» button can be used to format the selected Flash card. The card with a defined FAT
type can only be selected with command line options. The FAT types that are permissible depend on
the number of sectors.
The «Info» button is used to update the information displayed.