MGE UPS Systems pulsar EX15 - Manual (Page 44)

Pulsar EX : 51032306XT/BB MGE UPS SYSTEMS 34
1 long beep
…
!
…
…
…
…
- +
% - +
1a to 1d
1f on/load energized
1e off/power on
indicate the battery
charge level (here,
between 10% and 20%)
c case of a device not fitted with the
"automatic bypass" option 21 :
v Pulsar EX will shut down after a delay
ranging from 100 ms to 1 minute depending
on the overload level;
c case of a device fitted with the
"automatic bypass" option 21 :
v if the power is within the operating range,
after a delay ranging from 100 ms to 1 minute,
the load will be switched to the AC for
20s and then back to the UPS,
v if the overload persists, Pulsar EX will
shut down and your loads will no longer
be supplied,
v if the power is not within the operating
range, Pulsar EX will shut down after a
delay ranging from 100 ms to 1minute and
your loads will no longer be supplied.
operation
(continued)
return of AC power
c regardless of the point in the above
sequence at which AC power is restored,
Pulsar EX will switch to normal operation:
load level
c Pulsar EX is now running. Press and hold
down the test button 2 :
c your loads are being supplied by
Pulsar EX.
c your loads are being supplied by
Pulsar EX.
overload
c overloading occurs if the power
consumption of the supplied loads exceeds
the rated output of Pulsar EX.
intermittent beeps
…
!
…
…
…
…
- +
% - +
1a flashing/overload
1f on/load energized
1e
off/power on
flashing/power off
…
!
…
…
…
…
- +
% - +
1a to 1d
1f on/load energized
silence
1e
off/power on
flashing/power off
indicate the load level
(here, between 90%
and 100%)