MGE UPS Systems pulsar EX15 - Manual (Page 42)

Pulsar EX : 51032306XT/BB MGE UPS SYSTEMS 32
operation
starting the Pulsar EX
c press down the "ON/OFF" button 3 :
Pulsar EX shutdown connecting Pulsar EX to
the AC outlet
c connect the power cable 5 to a wall
socket or, for cable connection, energise the
AC power supply;
c close the battery switch 7 on Pulsar EX
and the circuit-breakers 32 on Pulsar EXB
battery modules (if these options are fitted)
("I" position);
c after connection to the AC outlet,
whatever the position of the button 3 , the
battery automatically recharges and the
indicator lights 1a to 1d indicate the
battery charge level.
c release the "ON/OFF" button 3 :
c normal operation will begin, with the
indicators in the following state:
c Pulsar EX will be turned off, with the
indicators in the following state:
c your loads are being supplied by
Pulsar EX.
c your loads are no longer supplied with
power.
…
!
…
…
…
…
- +
% - +
1a to 1d
1f off/load de-energized
silence
1e
indicate battery state
off/power on
flashing/power off
…
!
…
…
…
…
- +
% - +
1a to 1d indicate battery state
1f on/load energized
silence
1e
off/power on
flashing/power off