MGE UPS Systems pulsar EX15 - Manual (Page 41)

Pulsar EX: 51032306XT/BB 31 MGE UPS SYSTEMS
getting started
(continued)
32
33
34
35
9
7
35
8
33
34
32
connecting the Pulsar EXB
battery extension modules
(option)
c check that the button 3 " " on the front
of Pulsar EX is in the released position;
c check that the battery switch 7 on
Pulsar EX and the circuit-breakers 32 on
the Pulsar EXB modules are open ("O"
position);
c check that the cable 5 really is
disconnected from the AC power or, in the
case of cable connection, that the AC power
really has been cut;
c open the cover 9 protecting the Pulsar EX
and 33 on Pulsar EXB;
c plug the battery connecting cable 35
supplied with Pulsar EXB into the
connectors 9 of Pulsar EX and 33 of
Pulsar EXB (see figure 6);
c in the case of an installation containing 2
battery modules, connect the second cable
35 into the connectors 34 of the first
module and 33 of the second module;
c the use of connectors 33 and 34 is
strictly limited to connection of 1 or 2 battery
modules with Pulsar EX.
Any other connection on these connectors is
forbidden as it risks damaging the battery
and voiding the warranty;
c refer to the "operation" section for startup
of Pulsar EX.
Figure 6