MSI MS-9246 User Manual

Page 91

A-6

MS-9246 1U Rackmount Server

Sync Transfer Rate (MB/Sec)
The field allows you to specify the maximum synchronous data transfer rate
depending on the type of each SCSI device. Select [ASYN] to enable asynchro-
nous negotiation for some older SCSI devices.

Packetized
When enabled, this option is supported by the device drivers. However, this
option is not supported by the BIOS.

QAS
When enabled, this option is supported by the device drivers. However, this
option is not supported by the BIOS.

Initiate Wide Negotiation
When set to [Yes], the field allows wide SCSI hard drives to use 16-bit (2 bytes)
transfers.

Enable Disconnection
This field tells the SCSI controller whether or not to allow the specified SCSI
device to disconnect during an I/O transfer operation. The disconnection ability
frees the SCSI bus to allow other I/O processes and thus optimizes the SCSI
bus performance. Setting options: [Yes], [No].

SCSI Device ID

Sync Transfer Rate (MB/Sec) ........ 320 320 320 320 320 320 320 320

Packetized......................................... Yes Yes Yes Yes Yes Yes Yes Yes

QAS................................................... Yes Yes Yes Yes Yes Yes Yes Yes

Initiate Wide Negotiation .............. Yes Yes Yes Yes Yes Yes Yes Yes

Enable Disconnection ..................... Yes Yes Yes Yes Yes Yes Yes Yes

Send Start Unit Command ............. Yes Yes Yes Yes Yes Yes Yes Yes

BIOS Multiple LUN Support ......... No No No No No No No No

Include in BIOS Scan ...................... Yes Yes Yes Yes Yes Yes Yes Yes