MSI MS-9246 - Manual (Page 110)

B-15
Adaptec SATA RAID Utility for Intel ICH5R
6. The Basics
An example of a typical Adaptec Storage Manager – Browser Edition screen is
shown below.
The action buttons are:
Logout — Selecting Logout ends your session and returns you to the
Login screen.
Rescan — Used to rescan the configuration of the system. Typically,
when a rescan is required, it occurs automatically, for example, after an
array is created.
However, the system configuration can change without Adaptec Storage
Manager being notified. For example, drives that are inserted or removed
from a nonintelligent enclosure or an enclosure powered on after you
logged into Adaptec Storage Manager would not be displayed unless you
manually rescan.
The remaining buttons open additional windows that provide more detailed infor-
mation and allow you to perform actions or change settings on a specific aspect
of your storage subsystem.
These are:
Events
Options
Help
Properties
Tasks
Immediately following the header frame is a controller information line including
the model number of the first Adaptec RAID controller found in the system and the
amount of cache memory (if any) installed on that controller.
Beneath the controller information are Physical Devices and Logical Devices
views that show connected devices and existing arrays on this controller. Con-
troller information and device views are repeated for each additional Adaptec
RAID controller in the system.
Select the controller by clicking anywhere on the controller information. When the
controller is selected, the Events, Properties and Tasks buttons change from blue
MSI Reminds You...
Depending on your operating system, browser, and color scheme you
may notice some differences between this illustration and your screen.