MSI MS-9246 User Manual
Page 90
A-5
SCSI BIOS Setup
the SCSI bus is necessary. Proper termination can ensure signal on the SCSI bus will
not reflect and cause data loss or errors. Settings options: [Enabled], [Disabled].
Additional Options
Boot Device Configuration
Press
Boot SCSI Controllers
Select either SCSI channel A (AIC-7902 A) or channel B (AIC-7902 B) to boot up
the SCSI subsystem.
Boot SCSI ID
Specify a SCSI device to become the boot device by selecting its SCSI ID.
Setting options: [0]~[15].
Boot LUN Number
If a boot device has multiple logical units, you must specify the boot logical unit
number (LUN). If multiple LUN support is disabled, specifying a number here is
useless. Setting options: [0]~[7].
SCSI Device Configuration
Press
allows you to specify the configuration for each device on the SCSI bus.
Single Image
Master SCSI Controller ..................... AIC-7902 A at slot 0A 03:07:00
Select SCSI peripheral from which to boot
Boot SCSI Controller ......................... AIC-7902 A at slot 0A 03:07:00
Boot SCSI ID ....................................... 0
Boot LUN Number ............................ 0
Boot Device Configuration
Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled