MSI MS-9246 - Manual (Page 76)

4-13
BIOS Setup
Interrupt
It specifies the interrupt for Port A/Port B. Options: [IRQ 3], [IRQ 4].
PS/2 Mouse
If your system has a PS/2 mouse port and you install a serial pointing device,
select [Disabled].
Legacy USB Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating
system that does not support or have any USB 1.1/2.0 driver installed, such as
DOS and SCO Unix. Set to [Disabled] only if you want to use any USB device
other than the USB mouse. Setting options: [Enabled], [Disabled].
Boot Features
The sub-menu controls system boot features.
Summary Screen
Selecting [Enabled] displays system summary screen during boot up. Options:
[Enabled], [Disabled].
Boot-time Diagnostic Screen
Select [Enabled] if you want to view the system diagnostic screen during boot-
time. Options: [Enabled], [Disabled].
QuickBoot Mode
Setting the item to [Enabled] allows the system to boot within 5 seconds since
it will skip some check items. Available options: [Enabled], [Disabled].
NumLock
[On] or [Off] turns NumLock on or off at boot up. [Auto] turns NumLock on if it
finds a numeric key pad. Options: [On], [Off], [Auto].
POST Error Pause
When set to [Enabled], the system will wait for user intervention on critical
POST errors. When set to [Disabled], the system will boot with no intervention
if possible. Options: [Enabled], [Disabled].
Boot Features
Summary Screen: [Enabled]
Boot-time Diagnostic Screen: [Enabled]
QuickBoot Mode: [Disabled]
NumLock: [Auto]
Post Error Pause: [Enabled]