MSI MS-9246 User Manual
Page 43
2-19
System Hardware
5. On each side of the chassis are three hooks to lock the chassis rail. First align the
chassis hooks with the holes on the rail. Secure the rail to the chassis and push the
rail backwards until it gets locked by the chassis hooks.
6. Screw the chassis rail to the chassis. Each chassis rail has two screw holes.
Follow the same procedures to install the second chassis rail.
Note: The chassis rail engraved
with “RIGHT SLIDE” on the inner
side should be screwed to the
right side of the chassis whereas
the “LEFT SLIDE” should be
screwed to the left side.
Push the rail backwards until it
gets locked by the chassis hooks.