MSI MS-9246 - Manual (Page 77)

4-14
MS-9246 1U Rackmount Server
DMI Event Logging
Press PgUp/<+> or PgDn/<-> to view DMI event logging.
View DMI Event Log
Press [Enter] to view the contents of the DMI event log.
Event Logging
This setting disables/enables the BIOS to log DMI (Desktop Management Interface)
events. Setting options: [Disabled], [Enabled].
ECC Event Logging
This setting disables/enables the BIOS to log ECC (Error Checking & Correcting)
events. Setting options: [Disabled], [Enabled].
Mark DMI Events as Read
Press [Enter] and a screen pops up, asking users to confirm whether or not to
clear all DMI event logs immediately. Press [Y] and [Enter], the BIOS will clear all
DMI event logs right away.
Clear All DMI Event Logs
When this setting is set to [Yes], the DMI event log will be cleared at next POST
stage. Then, the BIOS will automatically set this option to [No]. Setting options:
[Yes], [No].
Console Redirection
Press PgUp/<+> or PgDn/<-> to configure Console Redirection.
Console Redirection
BIOS Redirection Port: [Disabled]
Baud Rate: [19.2K]
Flow Control: [CTS/RTS]
Console Type: [PC ANSI]
FIFO Level: [Level 14]
Console Connection: [Direct]
Continue C.R. after POST: [On]
# of Video Pages to Support: [1]
DMI Event Logging
Event Log Validity: Valid
Event Log Capacity: Space Available
View DMI Event Log: [Enter]
Event Logging: [Enabled]
ECC Event Logging: [Enabled]
Mark DMI Events as Read: [Enter]
Clear All DMI Event Logs: [No]