Multi-Tech Systems RF500S - Manual (Page 30)

30
RouteFinder RF500S User Guide
Testing your Connection
When you select Run Monitor, the RouteFinder Monitor program loads.
1. To test your current settings, select Test Connection. Select Connect Port 1 to test the WAN
port. Select Connect Port 2 to test the serial async port. The monitor activity will appear in the
display window. Refer to the RouteFinder Monitor chapter in this User Guide for additional
information about the monitoring capabilities of the RF500S.
2. After successfully using the Test Connection option in Run Monitor, refer to the LAN Client
Settings chapter of this User Guide to continue with your installation by configuring your LAN
workstations.
Note: If a problem occurs while testing your connection, or you need to configure more advanced
options for your RouteFinder, use RouteFinder Manager by selecting Programs | RouteFinder
Manager | RouteFinder Manager.