MGE UPS Systems Switched PDU - Manual (Page 28)

3. Operations
Displaying the status of the Environmental Monitor
The Envmon command displays the status of the integrated Environmental Monitor.
By default, only administrative user accounts are allowed access to the Envmon command. An administrator
may user the Set User Envmon command to enable and disable access for other user accounts.
To display the status of the Environmental Monitor:
At the Switched PDU: prompt, type envmon and press Enter .
Example
The following command displays the status of the Environmental Monitor.
Switched PDU: envmon
Environmental Monitor .A
Name: Florida_HQ_1 Status: Normal
Temperature/Humidity Sensors
ID Name Temperature Humidity
.A1 Temp_Humid_Sensor_A1 Not Found Not Found
.A2 T/H2_Florida_HQ_1 23.5 Deg. C 22 % RH
Starting a new session
The Login command activates the Username: prompt. The current session ends, allowing a user to log in and
start a new session under a different username.
To start a new session:
At the Switched PDU: prompt, type login and press Enter . The Username: prompt appears.
Ending a session
The Quit or Logout commands ends a session. A session ends automatically when no activity is detected for
five minutes, or upon loss of connection.
To end a session:
At the Switched PDU: prompt, type quit and press Enter , or
Type logout and press Enter .
Page 28 - 301-0399-4 Rev A.