Miele DG 2351 - Manual (Page 67)

Fitting the feet
The appliance is supplied with four feet.
If the building-in recess is 350 mm high, the steam oven is installed without fitting
the feet.
If the building-in recess is 360 mm high, the feet need to be screwed into the
appliance before installing it in the recess.
If the appliance is being installed in a counter top casing (DGSG) or in a
building-under casing (DGUG) the feet must not be fitted.
^ Carefully lay the appliance on its back and screw the four feet into the holes
provided (see illustration).
Installation
67