Miele DG 2351 - Manual (Page 51)

The k symbol, the processing time of
22 minutes and the Start symbol h will
appear in the display.
^ Press the time/temperature selector.
Descaling will now begin, and the time
will be shown counting down. It is only
possible to cancel the descaling
process during the first few minutes.
After that the process cannot be
cancelled.
Do not adjust the function selector
during the descaling process. If it is
turned before the end of the
process, the whole process will have
to be started from the beginning
again.
When 10 minutes remain, an audible
tone will sound and "Rinse out water
container" will appear in the display.
^ Remove the water container and
empty it out. Remove the insert.
^ Rinse the water container and the
insert thoroughly.
^ Replace the insert and fill the water
container with 1 litre of water. Push
the water container into the appliance
until it connects.
^ Press the time/temperature selector
to continue the process.
After descaling:
An audible tone will sound when the
descaling process has been
completed.
^ Open the door.
^ Remove the water container and
empty it out.
You can now either switch the
appliance off or select a function
and use the appliance as normal.
Cleaning and care
51