Microtek MV300 User Manual
Page 43
43
Images or Movie/Audio clips cannot
be played back.
A:
The Mode switch is set to the incorrect mode.
• Set the Mode switch to Playback mode ( ).
A:
The SD card is write-protected.
• Set the write-protected tab on the SD card to the unlocked position.
A1: The Mode switch is set to the incorrect mode.
• Set the Mode switch to Playback mode ( ).
A2: The “Video Out” setting is set to the incorrect system.
• Enter the Setup mode, set Video Out to “NTSC” or “PAL” depending
on your video output system.
A3: The DV camera is disconnected from the TV set.
• Make sure the video cable is properly connected to both the DV
camera and the TV set.
The DV camera cannot delete
images or movie/audio clips.
Images or Movie/Audio clips cannot
be played back on TV.