Microtek MV300 - Manual (Page 34)

34
Frequency
To avoid flickering images on the LCD screen, you
should make sure that the DV camera Frequency setting
matches the frequency of mains electricity in your
country. China and Europe use a 50 Hz system.
America and Japan use a 60 Hz system. If you are
unsure what frequency your mains supply is, consult
your power company.
To access the Frequency setting:
1. Turn on the DV camera and press the MENU button
to display the main menu screen.
2. Press the button to select the Setup menu option
at the top.
3. Use the / button to select the
Frequency option.
4. Press the button to display the
available settings.
5. Use the / button to select the
required setting.
6. Press the button to confirm
your choice.
7. Press the MENU button to exit
the menu.
Power Saving
Turn the Power Saving function on to preserve battery
life. When the power saving function is used, the DV
camera will turn itself off after a few minutes of
inactivity. To access the Power Saving function:
1 Turn on the DV camera and press the MENU button
to display the main menu screen.
2. Press the button once to select the Setup menu
option at the top.
3. Use the / button to select the
Power Saving option.
4. Press the button to display the
available settings.
5. Use the / button to select the
required setting.
6. Press the button to confirm
your choice.
7. Press the MENU button to exit
the menu.